Tag: Thermoplastic coatings
How To Use Thermoplastic Powder Coatings
The using method of thermoplastic powder coatings mainly include: Electrostatic spraying Fluidized bed process Flame Spray technology Electrostatic Spraying The basic principle of this process is that the electrostatic powder is guided to the surface of the metal workpiece under the combined action of compressed air and electric field when passing through the gap between the spray gun and the grounded metal workpiece. The charged powder adheres to the surface of the grounded metal workpiece, then is melted in anRead More …
Thermoplastic Powder Coatings Types
Thermoplastic powder coatings types mainly have the following types: Polypropylene Polyvinyl chloride (PVC) Polyamide (Nylon) Polyethylene (PE) Advantages are good chemical resistance, toughness and flexibility, and can be applied to thick coatings. The disadvantages are poor gloss, poor leveling and poor adhesion. The specific introduction of thermoplastic powder coating types: Polypropylene powder coating Polypropylene powder coating is a thermoplastic white powder with a particle diameter of 50~60 mesh. It can be used in anti-corrosion, painting and other fields. It isRead More …
What is Thermoplastic Powder Coating
A thermoplastic powder coating melts and flows on the application of heat, but continues to have the same chemical composition when it solidifies on cooling. Thermoplastic powder coating is based on thermoplastic resins of high molecular weight. The properties of these coatings depend on the basic properties of the resin. These tough and resistant resins tend to be difficult, as well as expensive, to be ground into the very fine particles necessary for the spray application and fusing of thinRead More …